DOR-O-MATIC Series 96000 Slide Control System
The DOR-O-MATIC Series 96000 Slide Control System is designed to provide reliable control and operation of automatic sliding door systems. The system consists of the 96010-900 Control Box and 96005-900 Transformer Box, offering adjustable door performance, integrated safety functions, activation device compatibility, and electric lock support.
System Components
96010-900 Slide Control Box
The primary control module responsible for door operation, speed adjustments, safety functions, and activation inputs.
96005-900 Transformer Box
Provides power conversion and distribution for the control system and connected accessories.
Key Features
- Adjustable opening and closing speeds
- Adjustable hold-open time delay
- Adjustable latch speed and latch position
- Auto-reverse safety protection
- Integrated electric lock support
- Weatherwise reduced-opening function
- Safety beam monitoring
- Morning-entry functionality
- Easy-open manual assist feature
- Compatible with multiple activation devices
Performance Specifications
Feature | Specification |
Closing Speed | 1 foot per second or less |
Auto-Reverse Force | 30 pounds or less |
Latch Position | 2 inches from closed or greater |
Hold Open Time | 4 seconds minimum |
These settings are designed to comply with ANSI/BHMA standards for power-operated pedestrian doors.
Adjustable Controls
The Series 96000 controller includes several field-adjustable operating parameters.
Opening Speed Adjustment
Allows installers to set door opening speed for smooth and safe operation.
Closing Speed Adjustment
Controls the rate at which the door returns to the closed position.
Backcheck Position & Speed
Adjusts door behavior as it approaches the fully open position, reducing impact and wear.
Hold-Open Time Delay
Adjustable from approximately:
- 1 second
- Up to 30 seconds
This setting determines how long the door remains open after activation.
Latch Position Adjustment
Allows customization of the door’s final latching location.
Latch Speed Adjustment
Fine-tunes the speed at which the door completes its closing cycle.
Safety Features
Auto-Reverse Protection
If an obstruction is detected:
- During closing, the door stops and fully reverses.
- During opening, the door stops and reverses direction.
- Multiple attempts are made before the system stops and requires inspection.
This feature helps prevent injury and protects door components from damage.
Safety Beam Shut-Off
When the door is fully closed:
- Safety beam activation cannot open the door.
- Once the door is activated, the safety beam resumes normal operation.
This prevents unwanted door activation while maintaining user protection.
Easy Open Function
When the door is manually pushed while fully closed, the operator automatically assists by opening the remainder of the travel under normal operating speed.
Weatherwise Opening Mode
The Weatherwise feature reduces the door opening width to help conserve energy and limit environmental exposure.
Benefits
- Reduced air infiltration
- Improved climate control
- Lower heating and cooling costs
- Increased energy efficiency
When enabled, the door opens to approximately 75% of its normal opening width.
Activation Devices
The Series 96000 controller supports multiple activation methods.
Interior Activation
Dedicated activation inputs for interior approach devices.
Exterior Activation
Supports exterior sensors and activation devices.
Morning Entry
Allows authorized opening regardless of key switch position.
Safety Beam Inputs
Dedicated inputs for monitored safety beam devices.
Look-See Sensor Compatibility
Optional integration with DOR-O-MATIC Look-See safety sensors.
Operating Modes
The control system supports multiple operational modes through a key switch or control station.
OFF
Door remains inactive.
1-Way
Interior activation opens the door while limiting exterior activation.
2-Way
Both interior and exterior activation devices can operate the door.
Hold Open
Door remains open continuously until mode is changed.
Electric Lock Integration
The Series 96000 system supports both:
Fail-Safe Electric Locks
- Unlock when power is removed.
- Commonly used for life-safety applications.
Fail-Secure Electric Locks
- Remain locked when power is removed.
- Used when security requirements are the priority.
Supported lock functions include:
- Interior activation release
- Exterior access control
- Hold-open operation
- Morning-entry override
The controller is designed for use with DOR-O-MATIC electric lock assemblies and compatible key switch controls.
Wiring & Connectivity
The Series 96000 system includes connections for:
- Transformer power input
- Motor and gearbox assemblies
- Hall-effect feedback sensors
- Electric locks
- Safety beams
- Activation devices
- Key switches
- Weatherwise controls
- Morning-entry switches
- Breakaway monitoring circuits
The modular wiring design simplifies installation and troubleshooting.
Applications
The DOR-O-MATIC Series 96000 Slide Control System is commonly used in:
- Retail storefronts
- Hospitals and healthcare facilities
- Airports and transportation centers
- Educational institutions
- Government buildings
- Commercial office entrances
- Automatic sliding door retrofits
Its adjustable operation, safety features, and electric lock compatibility make it a dependable solution for high-traffic automatic sliding door applications.
Best Practices
For optimal performance:
- Use a dedicated electrical circuit.
- Keep wiring away from moving components and sharp edges.
- Verify all safety devices are functioning before placing the system into service.
- Perform a complete operational walk-through after installation.
- Train building personnel on proper operation and emergency procedures.
Proper setup and maintenance help ensure long-term reliability, code compliance, and safe operation of the automatic door system.
