Solving Door Closer Problems: Troubleshooting Tips and Solutions

Door closers are an essential part of doors as they contribute to the safety of the door. They help in controlling the environment, air handling, and fire and smoke mitigation. Door closers are also crucial in securing an opening. Building codes require that all fire doors have door closers, and they are typically used on commercial building doors. It is also necessary to have door closers on doors with electronic access control to ensure that they will self-close and latch. Other doors that can benefit from door closers are non-emergency perimeter doors, interior doors in hallways, and doors that lead to rooms.

Troubleshooting Door Closer Problems

First, inspect for visible damage to the door, door hardware accessories, and frame. Is there any liquid nearby, such as on the door or floor? If a leaking door closer is found, it must be replaced or factory serviced. The hydraulic valves of the door closer may need to be adjusted.

Next, check to ensure that the door closer is securely attached to the door. Is the door warped in any areas? Is the arm bent? Is there any hardware missing? Confirm that the closer and arm were mounted correctly in the proper location.

Then, check that the tension spring was correctly preloaded when the closer arm was installed. Adjust the latch setting or closer spring issue. These adjustments might solve the problem, or the issue might be deeper than a closer setting. This is another way to check what exactly is causing the door closer problem.

Other Door Closer Problems

It is also essential to check that the issue is not coming from a damaged door, frame, or hinges. When you open the door, can you feel the backcheck engage and cushion the opening of the door when it reaches the arc’s limit?

Did the door close and latch when it reached the end of its closing arc? If it doesn’t latch, it might be caused by a poorly adjusted latch speed, latch engage position or a misaligned latch. It might also be loose hinges or a warped frame.

If the door closer is newly installed, it’s possible that the door lock, latch, or strike wasn’t installed, aligned, specified, or set up correctly.

For inswinging doors, did the door slam when it closed? On the other hand, did the outswinging door stall before it reached the latch position? There might be some stack pressure caused by temperature systems on the opposite side of the door. This might be causing your door closer problem.

Solve Your Door Closer Problem

Door closers are a crucial part of keeping doors safe. A door should always be in control and working correctly when it’s being opened, while the door is closing, and when it’s closed. These all depend on a door closer functioning properly.

If none of the above troubleshooting tips work, it is recommended that the door closer manufacturer is contacted to help solve the problem. By following the steps mentioned above, door-closer problems can be solved quickly and easily. It is essential to maintain and take care of the door closer to ensure its proper functioning, which contributes to the overall safety of the door.

Contact Cypress Door and Glass Today!

If you’re experiencing door closer problems, contact Cypress Door and Glass for professional door installation, door repair, glass door installation, and glass repair services. Our team of experts can solve your door closer problems and ensure your doors are safe and secure.